PA 3000
Class H-Power Amplifier
- 2 channels
- 2 x 1450W @ 4 Ω
2 x 1450 Watt @ 4 ohm / 2 x 1250 Watt @ 8 ohm / 1 x 2900 Watt @ 8 ohm Bridge
Power consumption 800 W
Frequency response, 4 Ohm load 20kHz, 4 Ohms, +/- 1dB
19.5 kg (42.99 pounds)
The Tecnare PA Series of power amplifier represent a new era in affordable, high quality performance and reliability with the latest power amplifications technologies. The line consists of five models in a uniform, rugged 2U chassis, the sound quality and durability of class H designs with the innovation of the latest power devices available.
The four models of two channels in the series are the PA900, PA2100, PA3000 and PA5000.
PA3000 is a 2 channel power amplifer that delivers up to 2 x 1450 W RMS @ 4 ohms (1980 W RMS bridged @ 8 ohms ), weighing just 19,5 kg.
It features independent gain dials, signal – clip and fault LEDs, stereo XLR input and Output link, 1.4 V to 0.775 V input sensitivity switch, mono – stereo – bridge switch, speakON® outputs.
Moreover, it is protected against shorts and open circuits.
Thanks to its high efficiency heat sinks and high speed DC fans, the PA3000 can withstand the hardest heat conditions ensuring great reliability.
Features
- Easy to configure in stereo / mono / bridge modes
- Two unit 19″ rack.
- Front panel signal / clip / protect LED indicators
- Extensive protective circuits ensure high reliability and operating safety
- XLR-3 input connectors / SPEAKON® NL4 output connectors
Applications
- Small and medium size PA systems
- Disco, club and DJ sound
- TECNARE systems
- Public Spaces
- Mobile and fixed installation
| General Specifications | |
| Number of Channels: | 2 |
| Power Output: | all channels driven (RMS) 2 x 1450 Watt @ 4 ohm / 2 x 1250 Watt @ 8 ohm / 1 x 2900 Watt @ 8 ohm Bridge |
| Audio Performance | |
| Voltage Gain | 37 dB |
| Frequency response | 4 Ohm load <20Hz to >20kHz, 4 Ohms, +/- 1dB |
| Inter‐channel crosstalk, | worst case combination better than ‐75dBr at 1kHz and ‐58dBr at 20kHz |
| Total harmonic distortion, THD | <0.5%, 20Hz-20kHz |
| Power Supply | |
| Operation voltage | 180-250 V (50/60 Hz) |
| Power consumption | 800 W |
| Physical | |
| Audio Input Analog: | 2x female and 2x male NeutrikTM XLR-3 |
| Amplifiers output | 2 x Neutrik SpeakonTM NL4 connectors |
| Protection | Protection against short circuits, no-load, on/off muting, RF interference. |
| Ventilation | Flow-through ventilation front to back |
| Enclosure | Standard 19” 2U (88mm), 319mm (12.56”) |
| Net Weight | 19.5 kg (42.99 pounds) |
Small and medium size PA systems
Disco, club and DJ sound
Public Spaces
Mobile and fixed installation
