PA 2100
Class H-Power Amplifier
- 2 channels
- 2 x 990W @ 4 Ω
2 x 900 Watt @ 4 ohm / 2 x 700 Watt @ 8 ohm / 1 x 1980 Watt @ 8 ohm Bridge
Power consumption 700 W
Frequency response, 4 Ohm load 20kHz, 4 Ohms, +/- 1dB
14.5 kg (31.97 pounds)
The Tecnare PA Series of power amplifier represent a new era in affordable, high quality performance and reliability with the latest power amplifications technologies. The line consists of five models in a uniform, rugged 2U chassis, the sound quality and durability of class H designs with the innovation of the latest power devices available.
The four models of two channels in the series are the PA900, PA2100, PA3000 and PA5000.
PA2100 is a 2 channel power amplifier that delivers up to 2 x 990 W RMS @ 4 ohms (1980 W RMS bridged @ 8 ohms ), weighing just 14,5 kg.
It features independent gain dials, signal – clip and fault LEDs, stereo XLR input and Output link, 1.4 V to 0.775 V input sensitivity switch, mono – stereo – bridge switch, speakON® outputs.
Moreover, it is protected against shorts and open circuits.
Thanks to its high efficiency heat sinks and high speed DC fans, the PA2100 can withstand the hardest heat conditions ensuring great reliability.
Features
- Easy to configure in stereo / mono / bridge modes
- Two unit 19″ rack.
- Front panel signal / clip / protect LED indicators
- Extensive protective circuits ensure high reliability and operating safety
- XLR-3 input connectors / SPEAKON® NL4 output connectors
Applications
- Small and medium size PA systems
- Disco, club and DJ sound
- TECNARE systems
- Public Spaces
- Mobile and fixed installation
Number of Channels 2
Power Output, all channels driven (RMS) 2 x 900 Watt @ 4 ohm / 2 x 700 Watt @ 8 ohm / 1 x 1980 Watt @ 8 ohm Bridge
Audio Performance
Voltage Gain 34 dB
Frequency response, 4 Ohm load <20Hz to >20kHz, 4 Ohms, +/- 1dB
Inter‐channel crosstalk, worst case combination better than ‐75dBr at 1kHz and ‐58dBr at 20kHz
Total harmonic distortion, THD <0.5%, 20Hz-20kHz
Power Supply
Operation voltage 180-250 V (50-60 Hz)
Power consumption 700 W
Physical
Audio Input Analog: 2x female and 2x male NeutrikTM XLR-3
Amplifiers output 2 x Neutrik SpeakonTM NL4 connectors
Protection Protection against short circuits, no-load, on/off muting, RF interference.
Ventilation Flow-through ventilation front to back
Enclosure Standard 19” 2U (88mm), 251mm (9.88”)
Net Weight 14.5 kg (31.97 pounds)
Small and medium size PA systems
Disco, club and DJ sound
Public Spaces
Mobile and fixed installation
