FULL-RANGE ULTRA-COMPACT LOUDSPEAKER
E6
Power
80 W AES / 160 W continuous
Impedance
16 Ohm
SPL
107 dB continuous / 113 peak
Weight
5,5 kg
E6 is a compact 2-way full-range loudspeaker system comprised of one 6-inch low frequency driver and one 1-inch (25 mm) exit voice-coil compression driver. Its exceptional dispersion provides 135° by 125° coverage in vertical cabinet orientation. Highslope passive crossovers minimize band overlap and well-controlled off-axis response. The cabinet is fitted with M8 threaded suspension points and Speakon® NL4 connectors. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction.
E6 is part of Tecnare’s E Series, a versatile family of loudspeakers for a wide variety of fixed installation applications
It has been designed for use as stand-alone full-range speaker or together with a passive sub-woofer (e.g. the ESW110).
Features
- Compact, vented two-way system
- 1 x 6½-inch-LF/ 1 x dome tweeter
- High-output, low profile
Applications
- Performing spaces
- Gyms, museums and AV spaces
- Multimedia spaces
- Retail outlets
- Educational Facilities
| Frequency Response: | 70 Hz – 18 kHz ± 3dB, measured on axys |
| Components: | 1 x 6,5-inch LF driver and 1 x 1-inch Tweeter |
| Nominal Dispersions: | 135ºH x 125ºV @ 6dB point |
| Impedance: | 16 Ohm |
| Axial Sensitivity: | 88dB (1w/1m) |
| Calculated SPL: | 107 dB continuous / 113 peak |
| Power Handling: | 80 W AES / 160 W continuos |
| Dimensions (HxWxD) (millimeters/inches): | 313 x 205 x 212 (mm) / 12.32″x 8.07″ x 8.34″ |
| Net Weight (kg/Pounds): | 5,5 kg. / 12.12 lbs. |
| Construction: | 16mm birch plywood. Finished in black paint |
| Grille: | Powder coated perforated steel with acoustically transparent reticulated foam |
E6 Accessories
BG E6
Flexible features allow these mounts to be installed anywhere, under trussing with a half coupler, atop tripod stands or suspended from overhead with pipe or threaded rod.
Steel, painted black or RAL colour under request.
HG1
• Manufactured from extruded Aluminium.
• Mounting holes from M8 to M10 screws.
The HG-1 Universal rigging bracket is time-saving rigging solutions that provide a safe method of securing loads at ceiling or truss.
Once anchored, they provide a simple and reliable method for aiming loudspeakers.
HG-1 is secured to the ceiling or truss throug a threaded hole to attached it a clamp truss or ceiling embedded screws.
HG2
The HG-2 Universal rigging bracket, allows fixing loudspeakers to wall or ceiling. The speaker bracket’s angle can be quickly and easily adjusted to ensure an optimal coverage. Its mounting holes guarantee compatibility with almost of loudspeaker, specially Tecnare E Series, up to 50kg (110.3 lbs.) in weight to a wall or ceiling.
